A VARIATION OF THE POPULAR FFR1 WITH A MOTORSPORT INSPIRED INNER RING. THE FUSIONFORGED™ FFR2 WAS DESIGNED TO BE RUN INDEPENDENTLY OR MIXED WITH THE FFR1 AS AN X2 OPTION.

The FFR2 is styled specifically to enhance modern high performance vehicles with a contemporary aesthetic such as Audi, BMW, Mercedes and Porsche.

Available Finishes

HOME / WHEELS / FFR2

02


Specification

The FFR2 in Detail

A lightweight flow form wheel manufactured using Ispiri FusionForged™ and Motioncast™ technologies, designed to enhance modern high performance vehicles.

Size Con Weight Max LD RRP
20 X 8.5 PC 11.5KG 705KG £380.36
20 X 9 PC 11.6KG 705KG £380.36
20 X 9.5 DC 11.2KG 705KG £393.48
20 X 10 DC 11.7KG 705KG £393.49
20 X 10.5 DC 12.1KG 705KG £393.49

PLEASE NOTE
* Weights may differ depending on ET and stud pattern

CONCAVE OPTIONS
PC = Performance Concave
DC = Deep Concave
STUD PATTERNS
BMW - 5 x 120
Audi/VW/Mercedes - 5 x 112
WARRANTY
2 years warranty and lifetime structural integrity guarantee, click here for further details.

Please contact Ispiri or your nearest Authorised Dealer for fitment advice for your vehicle.
Please note prices shown include UK VAT at 20%

RegisterEd Design
The FFR2 is a registered Ispiri
design (reg no: TBC)

IW Exclusive

Handcrafted finishes, special colours, discover IW Exclusive products

Discover

04


Technology

Combining Cutting Edge Technologies

MotionCast™ - The Pinnacle in casting technology

FFR wheels are initially cast using the Ispiri Motioncast™ process, a superior form of casting that produces a denser alloy with less impurities and air pockets, allowing for a lighter and stronger wheel than traditional Low Pressure Cast wheels.

Low Pressure Cast Alloy

More impurities and air pockets within the alloy

Ispri Motioncast

Less impurities and fewer air pockets within the alloy

Ispiri Flow Form Technology

Ispiri FusionForged™ utilises our state-of-the-art flow form technology. This process uses a special drum combined with heat and pressure applied by rollers that compress stretch and form the wheel barrel to a pre-defined thickness and desired profile.

This alters the structure of the aluminium forging a wheel barrel that is thinner, stronger and significantly lighter (approx 25%) than a traditional cast wheel, with enhanced strength and reduced weight properties comparable to fully forged wheels.

  • Fusionforged™ Step 1

    Each wheel is transferred from an oven to the flow forming drum. High pressure rollers move into position at the top of the wheel barrel.
  • Fusionforged™ Step 2

    The rollers move down the barrel applying pressure to compress, stretch and form the heated wheel barrel.
  • Fusionforged™ Step 3

    Flow forming alters the structure of the aluminium to produce a wheel barrel that is thinner, stronger and significantly lighter than traditional cast.

05


Concave Options

Two Concave Options Available

Performance Concave (PC)

Designed for maximum brake clearance suitable for larger brakes.

Concave Depth

20" - 47mm

Deep Concave (DC)

Front & rear wheel option in
specific widths.

Concave Depth

20" - 66mm

More Wheels

  • ISR8

    ISR Series

  • FFR1

    FFR Series

  • FFR1D

    FFR Series

  • FFR2

    FFR Series

  • FFR5

    FFR Series

  • FFR6

    FFR Series

  • FFR7

    FFR Series

  • FFR8

    FFR Series

  • CSR1D

    CSR Series

  • CSR2

    CSR Series

  • CSRD TF

    CSR Series

upup